Fractional erbium laser MED-X Er Glass 1550
Cashback 0% -
(Czech Republic, Slovakia, Poland, Germany, Austria, Spain, United Kingdom)
- Brand: Alvi Prague
- Product Code: MED-X Er Glass 1550
Fractional erbium laser MED-X Er Glass 1550
Fractional erbium laser MED-X Er Glass 1550 is an innovative equipment that will restore attractiveness, self-confidence to your clients, relieve congenital and acquired skin lesions. After just a few sessions of application, the natural process of rejuvenation is restored, metabolism improves.
Alvi Prague offers to buy a laser to effectively and painlessly solve various problems of patients. The device is certified according to the European security system, tested and meets accepted quality standards.

The principle of operation of an erbium fractional laser
Deep non-ablative fractional photothermolysis on MED-X Er Glass is performed using 1550 nm radiation. This radiation spectrum penetrates to a depth of up to 1400 microns, that is, it reaches the reticular layer of the dermis. The restructuring of the deeper layers of the skin allows you to correct more pronounced skin imperfections. The method is optimal for smoothing fine wrinkles and scars, smoothing the relief and texture of the skin, tightening and tightening it.
Erbium laser MED-X Er Glass 1550 creates an energy beam that penetrates the skin to a depth of about a millimeter. The concentrated light flux is absorbed and scattered by the water contained in the human body, so the use of equipment is safe and does not lead to burns.

The use of a laser in aesthetic cosmetology gives a number of positive effects:
- Eliminates characteristic age-related changes.
- Improves congenital deficiencies of facial tissues or damage acquired over a period of life.
- Smoothes mimic wrinkles.
- Tightens wrinkles in places of accumulation of adipose tissue or natural folds on the joints.
Fractional laser MED-X Er Glass 1550 will help to achieve a sustainable rejuvenating effect, get rid of dermatological problems of a congenital or acquired nature. This technique of aesthetic cosmetology, which successfully replaces surgery.

Device features
The erbium laser was developed as a transitional option between devices with a wavelength of 2940 nm and analogues that use CO2. A special "offset" of the range reduces the absorption of energy by the water contained in the human body. Penetrating into tissues, the laser beam does not cause cell ablation. The flow, passing to a given depth, gradually heats up, the coagulation process starts. The particles coagulate, which avoids damage to the skin and does not affect the outer layers of the epidermis.
In an erbium laser, atoms of a functional substance are introduced into a glass fiber, which allows you to form a narrow stream of particles for a delicate effect on damaged areas, wrinkles or other areas.

Long lasting effect
Fractional laser is a unique equipment, thanks to which it is possible to achieve sustainable tissue rejuvenation at the cellular level. The device has a pulse energy, depending on the mode, up to 120 mJ, which allows you to split the light flux, acting on the treated area with a laser beam. The laser handpiece creates a beam containing up to 2601 points. They make microscopic heating, which starts the process of controlled inflammation without contamination of the surrounding area with the decay products of dead cells. As a result, active tissue growth begins with the formation of a protein skin frame, which leads to skin rejuvenation and tightening.

Erbium fractional laser package
Alvi Prague manufactures and supplies equipment for aesthetic cosmetology centers, medical institutions and gynecological rooms.
The package includes:
- MED-X Er Glass 1550 body with LCD screen for setting and monitoring operation parameters.
- Two keys to start and turn off the laser.
- Power cord in flexible braid, protected from moisture and pollutants.
- Starter pedal with connection cable.
- Ergonomic laser handpiece.
- Set of tips for handpiece
For movement, the laser is equipped with wheels with a stopper, which makes it easy to move the device, setting it in a convenient place.

Specifications
Erbium laser MED-X Er Glass 1550 is a compact device, convenient for frequent use. The weight in the functional state is 41.5 kg, and the dimensions are 963 mm * 505 mm * 480 mm. In the package, the weight of the laser is 62.16 kg with dimensions of 1052 mm * 620 mm * 644 mm.
The impact energy varies depending on the settings. In Moving mode, the laser operates in the range of 1-30 mJ, and in Stamp mode - 1-120 mJ.
The laser is highly reliable. The operating life of the diode block is 10,000 hours or more with daily use.

Possibilities of forming a light spot
Depending on the settings and mode, the fractional erbium laser emits a light spot of a maximum size of 4*4 cm, which reduces the treatment time, which is especially important when exposed to areas of delicate facial tissues or during gynecological procedures.
A set of attachments for the laser handpiece allows you to change the shape of the light beam. Oval, crescent and several polygon options are available. Due to this, the option that is suitable for specific conditions is easily selected, without affecting healthy tissues.

Operator and patient safety
The device is certified in accordance with European requirements, has the fourth class of safety and IP31 standard.
To protect the operator and the patient, special goggles are supplied with the laser, which protect the eyes from the negative effects of concentrated light. The device is protected from overheating by the cooling system, which provides continuous air circulation near the functional units.

Easy to use device
If you need a high-quality and reliable device, then choose the MED-X Er Glass 1550 fractional erbium laser. In accordance with safety requirements, only qualified workers who have undergone special training can use the device for health or beauty treatments. However, the optimized functionality of the laser allows you to master its capabilities quickly.
To speed up the learning process, the company offers master classes from the manufacturer that will explain in an accessible way the nuances of using the MED-X Er Glass 1550 fractional erbium laser.

The choice of professionals
When we developed the device, engineers, designers and testers were based on the wishes of current medical professionals and cosmetologists. The device was equipped with the most simple and intuitive interface to facilitate and speed up the setup, to avoid mistakes in use.
The fractional laser, equipped with erbium glass, avoids severe burns and other skin damage, which reduces the recovery time after the procedure. Due to the gradual heating of the light flux with a uniform absorption of energy, patients do not experience discomfort, so in most cases anesthesia can be avoided.
Why MED-X Er Glass 1550
Alvi Prague company offers a product of its own design, a guarantee of 18 months, information support and professional maintenance throughout the entire period of operation.

Laser type |
erbium fractional laser |
Impact energy: in «Moving» mode in «Stamp» mode |
1 mJ - 30 mJ; 1 mJ - 120 mJ. |
Pulse length: in «Moving» mode in «Stamp» mode |
0.1-3 ms; 0.48 ms. |
Pulse frequency: in «Moving» mode in «Stamp» mode |
100-600 Hz; 1500 Hz. |
Laser wavelength |
1550 nm |
Max. spot size |
4*4 cm |
Operating life of the diode block |
up to 10,000 hours or more |
Warranty life of the diode block |
18 months |
Number of light dots |
max. 2601 points |
Shape of the impact zone |
rectangle, ellipse, circle, square, triangle, hexagon, crescent. |
Guide beam |
semiconductor laser with wavelength 650 nm and power up to 5 mW |
Laser beam transmission system |
erbium glass fiber |
Cooling system |
air |
Device parameters |
|
Power supply |
220-240 V / 50 Hz |
Power consumption |
500 W or less |
Protection Class |
IP20 |
Net Dimensions |
963*505*480 mm |
Net Weight |
41,5 kg |
Basic configuration of the device |
||
1. |
Fractional laser MED-X Er Glass 1550 |
1 pc. |
2. |
Key to turn on/off the device |
2 pcs. |
3. |
Power cable |
1 pc. |
4. |
Pedal with connection cable |
1 pc. |
6. |
Laser handpiece |
1 pc. |
8. |
Tips for laser handpiece |
3 pcs. |
9. |
Safety glasses for the specialist |
1 pc. |
10. |
Safety glasses for the client |
1 pc. |
13. |
User manual |
1 pc. |
14. |
Transport packaging |
2 pcs. |
Consumable materials |
||
15. |
Fuses |
2 pcs. |